LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(b) Using SST and a press, press in the case bearing outer race to the differential carrier retainer.
SST: 09950-60020
09951-00790
09951-00890
09952-06010
SST: 09950-70010
09951-07100
NOTE:
Do not apply hypoid gear oil to a new bearing.
7. INSTALL FRONT DIFFERENTIAL DUST DEFLECTOR
(a) Using SST and a press, insert a new dust deflector into the companion flange.
SST: 09612-30012
SST: 09950-70010
09951-07100
-
Slowly press in the dust deflector but not excessively.
-
If any burrs remain after pressing in the deflector, remove them.
8. ADJUST DRIVE PINION PRELOAD
(a) Fix the differential carrier with an attachment.
(b) Install the drive pinion to the differential carrier, and then install the bearing inner race and oil slinger while supporting the drive pinion by
hand.
-
Do not apply hypoid gear oil to a new bearing.
-
Do not drop the drive pinion.
HINT: Install the spacer and oil seal after performing the ring gear tooth contact pattern inspection adjustment.