LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1671015.png)
Do not apply hypoid gear oil to a new bearing.
4. INSTALL FRONT DRIVE PINION FRONT TAPERED ROLLER BEARING INNER RACE
(a) Using SST and a press, press in the front drive pinion front tapered roller bearing inner race to the drive pinion.
SST: 09309-14020
NOTE:
Do not apply hypoid gear oil to a new bearing.
5. INSTALL FRONT DIFFERENTIAL CASE BEARING OUTER RACE LH
(a) Remove the differential carrier from the overhaul attachment.
(b) Install the differential case washer to the differential carrier.
HINT:
-
If the final gear set (drive pinion and ring gear) or differential case bearing are replaced, select and install the thinnest differential case
washer first.
-
If the drive pinion, ring gear or differential case are reused, select and install a differential case washer with the same thickness as the one
before the disassembly first.
(c) Using SST and a press, press in the case bearing outer race to the differential carrier.
SST: 09950-60020
09951-00680
09951-00790
09952-06010
SST: 09950-70010
09951-07100
NOTE:
Do not apply hypoid gear oil to a new bearing.
6. INSTALL FRONT DIFFERENTIAL CASE BEARING OUTER RACE RH
(a) Install the differential case washer to the differential carrier retainer.
HINT:
-
If the final gear set (drive pinion and ring gear) or differential case bearing are replaced, select and install the thinnest differential case
washer first.
-
If the drive pinion, ring gear or differential case are reused, select and install a differential case washer with the same thickness as the one
before the disassembly first.
