LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Hood Latch Release Cable: Service and Repair
Removal
ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Removal
2. REMOVE ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Removal
3. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Removal
4. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal
5. REMOVE RADIATOR GRILLE See: Grille/Service and Repair/Removal and Replacement/Removal
6. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) See: Accessories and Optional
Equipment/Collision Avoidance and Parking Assist Systems/Distance Sensor/Service and Repair/Removal
7. REMOVE HOOD LOCK CONTROL CABLE COVER
(a) Remove the 3 screws.
(b) Detach the claw and remove the cable cover.
8. REMOVE FRONT FENDER PROTECTOR UPPER LH
(a) Using a screwdriver, detach the 3 clips and remove the protector.
HINT
Tape the screwdriver tip before use.
9. REMOVE HOOD LOCK ASSEMBLY
(a) Remove the cap.