LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2822002.png)
(b) Remove the 2 bolts and nut.
(c) Remove the hood lock.
(d) Disconnect the hood lock control cable.
10. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Detach the 2 claws.
(b) Disconnect the hood lock control cable and remove the hood lock lever.
11. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Using a screwdriver, disconnect the clamps shown in the illustration.
HINT
Tape the screwdriver tip before use.
(b) Pull the cable from the engine room and remove it.
