lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Lumbar Support Adjuster Assembly (For Front Side)|Page 11189 > < Lumbar Support Adjuster Assembly (For Front Side)|Page 11187
Page 9
background image

NOTICE:
*

Be careful not to damage the cover.

*

When installing the hog rings, avoid wrinkling the cover.

(b) Attach the hooks and connect the connector.

(c) Attach the seatback cover bracket with the nut.

Torque : 5.6 Nm (57 kgf-cm, 50 in-lbf)

11. INSTALL REAR SEAT COVER CAP LH   See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly

12. INSTALL SEAT CLIMATE CONTROL ECU LH   See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly

13. INSTALL POSITION CONTROL ECU LH   See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly

14. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY LH   See: Service and Repair/Overhaul/Rear Seat Assembly (For

Ottoman)/Reassembly

15. INSTALL REAR SEAT HEADREST SUPPORT LH   See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly

16. INSTALL REAR SEAT HEADREST ASSEMBLY LH   See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly

17. INSTALL REAR SEAT SHOULDER BELT GUIDE ASSEMBLY LH   See: Service and Repair/Overhaul/Rear Seat Assembly (For

Ottoman)/Reassembly

18. INSTALL REAR SEATBACK ASSEMBLY RH   See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for

Ottoman)/Installation

19. INSTALL REAR CONSOLE BOX (w/ Rear Console Box)   See: Interior Moulding / Trim/Console/Service and Repair/Removal and

Replacement/Rear Console Box (For Ottoman)/Installation

20. INSTALL REAR SEATBACK ASSEMBLY LH   See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for

Ottoman)/Installation

21. INSTALL REAR SEAT CUSHION ASSEMBLY RH   See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for

Ottoman)/Installation

22. INSTALL REAR SEAT CUSHION ASSEMBLY LH   See: Service and Repair/Removal and Replacement/Rear Seat Assembly (for

Ottoman)/Installation

23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected  
  See: Testing and
Inspection/Programming and Relearning.

24. INSTALL COWL TOP VENTILATOR LOUVER RH   See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and

Replacement/Installation

Lumbar Support Adjuster Assembly (For Front Side)|Page 11189 > < Lumbar Support Adjuster Assembly (For Front Side)|Page 11187