LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(d) Detach the hooks and remove the hog rings and seatback cover with pad from the seatback spring.
Installation
SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Ottoman): INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
1. INSTALL REAR SEATBACK COVER WITH PAD RH
(a) Using hog ring pliers, install the seatback cover with pad to the seatback spring with new hog rings.
NOTICE:
*
Be careful not to damage the cover.
*
When installing the hog rings, avoid wrinkling the cover.
(b) Attach the hooks and connect the connector.
(c) Attach the seatback cover bracket with the nut.
Torque : 5.6 Nm (57 kgf-cm, 50 in-lbf)
2. INSTALL REAR SEATBACK CLIMATE CONTROL BLOWER RH See: Service and Repair/Overhaul/Rear Seat Assembly (For
Ottoman)/Reassembly
3. INSTALL REAR SEAT COVER CAP RH See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly
4. INSTALL SEAT CLIMATE CONTROL ECU RH See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly
5. INSTALL POSITION CONTROL ECU RH See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly
6. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY RH See: Service and Repair/Overhaul/Rear Seat Assembly (For
Ottoman)/Reassembly
7. INSTALL REAR SEAT HEADREST SUPPORT RH See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly
8. INSTALL REAR SEAT HEADREST ASSEMBLY RH See: Service and Repair/Overhaul/Rear Seat Assembly (For Ottoman)/Reassembly
9. INSTALL REAR SEAT SHOULDER BELT GUIDE ASSEMBLY RH See: Service and Repair/Overhaul/Rear Seat Assembly (For
Ottoman)/Reassembly
10. INSTALL REAR SEATBACK COVER WITH PAD LH
(a) Using hog ring pliers, install the seatback cover with pad to the seatback spring with new hog rings.