LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1613004.png)
(a) Remove the bolt and No. 5 brake actuator bracket.
27. REMOVE NO. 1 BRAKE ACTUATOR HOSE
NOTICE:
When disconnecting the hose, be careful that there is no excessive weight applied to the union of the brake actuator (especially in the
union rotation direction).
(a) Remove the hose clip and the No. 1 brake actuator hose.
28. REMOVE BRAKE ACTUATOR PROTECTOR
(a) Remove the protector.
29. REMOVE NO. 2 BRAKE ACTUATOR HOSE
NOTICE:
When disconnecting the hose, be careful that there is no excessive weight applied to the union of the brake accumulator pump
(especially in the union rotation direction).
(a) Disconnect the No. 2 brake actuator hose from the No. 3 brake actuator bracket and then remove the clamp.
