LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1178001.png)
Information Bus: Reading and Clearing Diagnostic Trouble Codes
MULTIPLEX COMMUNICATION: LIN COMMUNICATION SYSTEM: DTC CHECK / CLEAR
HINT
Refer to the Techstream operator's manual for further details.
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG) and turn the Techstream on.
(c) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(d) Read the DTCs by following the directions on the screen.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG) and turn the Techstream on.
(c) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(d) Erase the DTCs by following the directions on the screen.
