LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (NO. 2 JUNCTION CONNECTOR - NO. 3 JUNCTION
CONNECTOR)
OK -- Continue to next step.
25. CONNECT CONNECTOR
(a) Reconnect the L98 No. 3 junction connector connector.
NEXT -- Continue to next step.
26. CHECK FOR SHORT IN CAN BUS WIRES (NO. 2 JUNCTION CONNECTOR - MAIN BODY ECU)
(a) Measure the resistance according to the value(s) in the table below.
Result
NG -- CHECK FOR SHORT IN CAN BUS WIRES (MAIN BODY ECU)
OK -- Continue to next step.
27. CHECK FOR SHORT IN CAN BUS WIRES (NO. 2 JUNCTION CONNECTOR - NO. 1 METER ECU)
(a) Measure the resistance according to the value(s) in the table below.