LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1179060.png)
(b) Measure the resistance according to the value(s) in the table below.
Result
NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO SKID CONTROL ECU (CANH, CANL)
OK -- REPLACE SKID CONTROL ECU See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Electronic
Brake Control Module/Service and Repair/Removal
8. CHECK FOR SHORT TO GND IN CAN BUS WIRE (ECM)
(a) Disconnect the A13 ECM connector.
(b) Measure the resistance according to the value(s) in the table below.
Result
