LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE COMBINATION METER ASSEMBLY (NO. 1 METER ECU SUB-ASSEMBLY) See: Instrument Panel, Gauges
and Warning Indicators/Instrument Cluster / Carrier/Service and Repair/Overhaul/Disassembly
Display and Navigation Assembly Communication Stop Mode
CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Display and Navigation Assembly Communication Stop Mode
- Display and Navigation Assembly Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM
HINT
For vehicles with multi-display only.
INSPECTION PROCEDURE
HINT
Operating the engine switch, any switches or any doors triggers related ECU and sensor communication with the CAN, which causes
resistance variation.
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(a) Disconnect the cable from the negative (-) battery terminal before measuring the resistances of the main wire and the branch wire.
CAUTION: