LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(d) Read the DTCs by following the directions on the screen.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG) and turn the Techstream on.
(c) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(d) Erase the DTCs by following the directions on the screen.
Problem Symptoms Table
MULTIPLEX COMMUNICATION: LIN COMMUNICATION SYSTEM: PROBLEM SYMPTOMS TABLE
HINT
*
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order
of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they
are listed. Replace parts as necessary.
*
Problem symptoms may occur if the electric power control system's functions malfunction. Follow the HOW TO PROCEED
WITH TROUBLESHOOTING procedures.
*
Inspect the fuses and relays related to the system before inspecting the suspected areas below.