LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1181177.png)
(a) Disconnect the A50 ECU connector.
(b) Disconnect the X8 sensor connector.
(c) Measure the resistance and voltage according to the value(s) in the table below.
Standard resistance:
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. CHECK RAIN SENSOR (BATTERY VOLTAGE AND GROUND)
(a) Disconnect the X8 sensor connector.
(b) Measure the resistance and voltage according to the value(s) in the table below.
Standard resistance:
