LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1782005.png)
(d) Using an E8 "TORX" socket wrench, remove the 2 stud bolts and generator.
Installation
1UR-FSE CHARGING: GENERATOR: INSTALLATION
1. INSTALL GENERATOR
(a) Using an E8 "TORX" socket wrench, set the generator with the 2 stud bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Install the generator with the 2 bolts and 2 nuts.
Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)
(c) Connect the generator connector.
