LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Alternator: Overhaul
Disassembly
1UR-FSE CHARGING: GENERATOR: DISASSEMBLY
1. REMOVE GENERATOR PULLEY
SST : 09820-63011
09820-06010
09820-06021
(a) Install SST1-A to the pulley shaft.
(b) Install SST1-B to SST1-A.
(c) Hold SST 1-A on the pulley shaft area, and tighten SST 1-B to the specified torque.
Torque : 39.2 Nm (400 kgf-cm, 29 ft-lbf)
NOTICE:
Securely fix SST1-A to the pulley shaft.
HINT
Read SST1-B tightening torque by using the reactive torque of SST1-A.
(d) Mount 2 faces of SST2 in a vise.
(e) With SST1-A and B attached to the generator, insert the pulley lock nut into the hexagon portion of SST2.
(f) To loosen the pulley nut, rotate SST1-A in the generator's normal rotation direction.
NOTICE: