LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1532001.png)
Differential Mount: Service and Repair
Installation
DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: INSTALLATION
1. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION
(a) Pass SST bolts through the area shown in the illustration, and install the mount cushion No. 1.
SST : 09570-24011
NOTICE:
*
Make sure the mount cushion installation angle misalignment is not over +-3
*
Make sure the mount cushion is not at an angle by first temporarily installing the mount cushion to the member before installing
SST.
*
Before using SST bolts, apply hypoid gear oil to their threads.
*
Be sure to combine SST properly.
*
Confirm that SST contacts the entire seat surface of the mount cushion.
*
Do not install SST bolts at an angle.
*
Make sure SST bolts are tightened equally.
2. INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION
(a) Pass SST bolt through the area shown in the illustration, and install the mount cushion No. 2.
SST : 09570-24011
