LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER RH See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
2. REMOVE ENGINE ROOM SIDE COVER LH See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
3. REMOVE FRONT CENTER FLOOR COVER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
4. REMOVE NO. 1 ENGINE UNDER COVER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
5. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR See: Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
6. DRAIN COOLANT (for Inverter) See: Hybrid Drive Systems/Power Control System/Service and Repair/Coolant (for Inverter)
7. REMOVE WATER PUMP WITH MOTOR AND BRACKET ASSEMBLY
(a) Disconnect the water pump connector.
NOTE: Wrap the connectors of the vehicle wire harness and the water pump with motor and bracket assembly to prevent coolant from
contaminating the connectors.
(b) Remove the 2 clips and disconnect the 2 water pump hoses.
(c) Remove the 2 bolts and water pump with motor and bracket assembly.
Installation
L110F HYBRID VEHICLE CONTROL: WATER PUMP WITH MOTOR: INSTALLATION
INSTALLATION
1. INSTALL WATER PUMP WITH MOTOR AND BRACKET ASSEMBLY