Lexus Workshop Service and Repair Manuals

(a) Install the water pump with motor and bracket assembly with the 2 bolts.

Torque: 22 Nm (224 kgf-cm, 16 ft-lbf)

(b) Connect the 2 water pump hoses with the 2 clips.
(c) Connect the water pump connector.

2. ADD COOLANT (for Inverter) See: Hybrid Drive Systems/Power Control System/Service and Repair/Coolant (for Inverter)

3. INSPECT FOR COOLANT LEAK See: Testing and Inspection/L110F Hybrid Vehicle Control

4. INSTALL FRONT CENTER FLOOR COVER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation

5. INSTALL FRONT LOWER SUSPENSION MEMBER PROTECTOR See: Engine/Service and Repair/Removal and Replacement/Engine

Assembly/Installation

6. INSTALL NO. 1 ENGINE UNDER COVER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation

7. REMOVE ENGINE ROOM SIDE COVER LH See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation

8. INSTALL ENGINE ROOM SIDE COVER RH See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation