LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(a) Remove the nut and disconnect the stabilizer link from the stabilizer bar.
(b) Remove the bolt, nut and stabilizer link from the rear No. 2 suspension arm.
54. REMOVE REAR STABILIZER LINK ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
55. DISCONNECT PNEUMATIC CYLINDER WITH REAR SHOCK ABSORBER ASSEMBLY LH See: Control Arm/Service and Repair/Rear
Upper Arm/Removal
56. DISCONNECT PNEUMATIC CYLINDER WITH REAR SHOCK ABSORBER ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
57. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
(a) Support the crossmember with the jack.
(b) Remove the 4 bolts.