RX 300 FWD V6-3.0L (1MZ-FE) (1999)
A.
Remove the 6 seat wires from the seat cushion cover and seatback cover (Figure 2).
3.
Remove seat heater.
A.
Seat cushion cover:
Cut the 34 tack pins that are fastened to the seat heater, then remove the seat heater.
B.
Seatback cover:
Cut the 12 tack pins that are fastened to the seat heater, then remove the seat heater.
4.
Seat cushion cover: Install new seat heater.