RX 300 FWD V6-3.0L (1MZ-FE) (1999)
Required Tools and Material
^
Tacker
^
Tacks
^
Hog Ring Pliers
^
Adhesive Tape
NOTE:
Special Service Tools can be ordered through the Lexus SST program by calling 1-800-933-8335.
How to use the Tacker:
As shown below, drive in a tack pin with the tacker and fix the seat heater to the seat cover.
Repair Procedure
^
For the installation/removal of the seat and the disassembly/assembly of the seat cushion assembly, refer to the 2000 RX 300 Repair Manual (pages
BO-147 through 157).
^
Care should be taken during the operation to protect the seat cover from scratches, dirt or accidental cuts.
1.
Turn seat cover inside out.
2.
Remove seat wire.