RX 300 FWD V6-3.0L (1MZ-FE) (1999)
26. REMOVE FLOOR SHIFT ASSEMBLY
(a) Disconnect the shift control link from the floor shift assembly.
(b) Disconnect the connectors.
(c) Remove the 4 nuts and floor shift assembly.
27. REMOVE AIR DUCTS
28. REMOVE INSTRUMENT PANEL SAFETY PAD
(a) Disconnect the connectors.
(b) Remove the 2 bolts, 2 nuts and instrument panel safety pad.
29. REMOVE NO.1 BRACE
(a) Remove the 2 nuts and shift control link.
(b) Remove the 2 bolts, 2 nuts and No.1 brace.
30. REMOVE NO.2 BRACE
Remove the 3 bolts, 2 nuts and No.2 brace.
31. REMOVE REINFORCEMENT
(a) Remove the 2 nuts and body ECU.
(b) Remove the 2 nuts and ABS ECU.
(c) Remove the pedal return spring.
(d) Remove the bolt, 2 nuts and instrument panel JIB.
(e) Remove the 4 bolts, 4 nuts and reinforcement.
INSTALLATION
Installation is in the reverse order of removal.