RX 300 FWD V6-3.0L (1MZ-FE) (1999)
20. REMOVE CENTER FLOOR CARPET COVERS
(a) Remove a clip and center floor carpet cover LH.
(b) Remove the 2 clips and center floor carpet cover RH.
21. REMOVE LOWER CENTER FINISH PANEL
Remove the 6 screws and lower center finish panel.
22. REMOVE CENTER CLUSTER FINISH PANEL
(a) Remove the 4 bolts.
(b) Using a screwdriver, remove the center cluster finish panel sub-assembly.
HINT: Tape the screwdriver tip before use.
(c) Disconnect the connectors and cables.
(d) Remove the 4 screws and multi display assembly.
(e) Remove the 4 screws and radio assembly.
23. REMOVE CLUSTER FINISH PANEL
(a) Remove the 2 screws.
HINT: Tape the screwdriver tip before use.
(b) Using a screwdriver, remove the cluster finish panel.
(c) Disconnect the connector.
24. REMOVE COMBINATION METER
(a) Remove the 3 screws and combination meter.
(b) Disconnect the connector.
25. REMOVE LOWER RETAINERS
Remove the 2 bolts and lower retainers.