RX 300 FWD V6-3.0L (1MZ-FE) (1999)
NOTE: At the time of assembly, please refer to the item. Check that the positive (+) lead wires are not grounded.
6. REMOVE ARMATURE FROM FIELD FRAME
REASSEMBLY
Reassembly is in the reverse order of disassembly.
HINT: Use high-temperature grease to lubricate the bearings, springs, steel ball and gears when assembling the starter.
REPLACEMENT
1. REPLACE CLUTCH ASSEMBLY
a. Disassemble the starter housing and the clutch assembly.
1.
Mount a brass bar in a vise, and install the starter housing and clutch assembly to the brass bar.
2. Push down the pinion gear.
3. Using a plastic-faced hammer, tap down the stop collar.
4. Using a screwdriver, pry out the snap ring.