RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Hood Latch Release Cable: Service and Repair
OVERHAUL
HINT: The installation is in the reverse order of the removal. However, when there is a special point concerning the installation, it is indicated.
1. REMOVE RADIATOR GRILLE
a. Remove the 2 bolts and auxiliary catch release lever.
b. Remove the bolt and auxiliary catch hook.
c. Remove the 5 nuts, clip and radiator grille.
2. REMOVE HOOD INSULATOR
a. Using a clip remover, remove the 8 clips and hood insulator.
HINT: If the clips are damaged, exchange them for new clips.
3. REMOVE HOOD SUPPORT ASSEMBLY LH
4. REMOVE HOOD SUPPORT ASSEMBLY RH
5. REMOVE HOOD TO RADIATOR SUPPORT SEAL
HINT: If the clips are damaged, exchange them for a new clips.
6. REMOVE HOOD TO FRONT FENDER SEAL LH