RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1666002.png)
HINT: If the clips are damaged, exchange them for new clips.
7. REMOVE HOOD SUB-ASSEMBLY
a. Remove the 4 bolts and hood.
8. REMOVE HOOD HINGE ASSEMBLY LH
a. Remove the 2 bolts and hood hinge.
9. REMOVE HOOD HINGE ASSEMBLY RH
a. Remove the 2 bolts and hood hinge.
10. REMOVE COOL AIR INTAKE DUCT SEAL
a. Using a clip remover, remove the 4 clips and cool air intake duct seal.
11. REMOVE HOOD LOCK ASSEMBLY
a. Remove the 2 screws and disengage the 2 claws and remove the hood lock control cable cover.
