lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Customer Interest for Sunroof / Moonroof Cable: > < Body - Moonroof Grinding/Moaning Noise|Page 9837
Page 6
background image

17.

Install roof headlining assembly.

18.

Initialize moon roof. If battery was disconnected, refer to TSIB No. PG002-03, Pre -Delivery Service (PDS) In formation for RX 330, " for
additional initialization procedures.

A.

Turn the ignition switch to the "ON" position.

B.

Push and hold the moon roof switch to the TILT UP, side or the "SLIDE-CLOSE" side until the following cycle of the moon roof operation
is completed:

a.

Closing

b.

Fully tilt up

c.

Fully tilt down

d.

Fully slide open

e.

Fully slide close

C.

After the cycle of operation above is completed, the initialization is completed.

D.

Check for proper operation of the "one-touch slide open and close" and "one-touch tilt up and down" functions by pushing the switch briefly
to the "SLIDE OPEN" and TILT UP" positions.

NOTE:

Jam protection function is enabled through the above initialization procedure.

Customer Interest for Sunroof / Moonroof Cable: > < Body - Moonroof Grinding/Moaning Noise|Page 9837