RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1775003.png)
A.
Remove the 5 bolts and center bracket.
10.
Remove Sliding Roof Housing Center Mounting Bracket RH
A.
Remove the 5 bolts and center bracket.
11.
Remove Sliding Roof Housing Rear Mounting Bracket LH
A.
Remove the 5 bolts and rear bracket.
12.
Remove Sliding Roof Housing Rear Mounting Bracket RH
A.
Remove the 5 bolts and rear bracket.
13.
Remove Sliding Roof Housing Sub-Assembly
A.
Disconnect the drive gear wire harness connector.
B.
Remove the 18 nuts and housing.
NOTE:
As the housing is very heavy, work must be done by 2 or more persons together.
14.
Remove Sliding Roof Drive Gear Sub-Assembly
A.
Remove the 2 bolts and drive gear
15.
Remove Sunshade Trim Sub-Assembly.
16.
Remove Sliding Roof Housing Panel
A.
Remove the 16 screws, 14 nuts and housing panel.
