RX 330 AWD V6-3.3L (3MZ-FE) (2004)
12.
DISCONNECT THE OIL COOLER INLET TUBE NO. 1
13.
DISCONNECT THE OIL COOLER OUTLET TUBE NO. 1
14.
REMOVE THE COOL AIR INTAKE DUCT SEAL
(a)
Using a clip removal tool, remove the 4 clips and cool air intake duct seal.
15.
REMOVE THE AIR CLEANER INLET NO. 2
(a)
Disconnect the VSV connector.
(b)
Remove the 2 wire harness clamps.
(c)
Remove the vacuum hoses from the hose clamp.
(d)
Remove the 2 bolts and the air cleaner inlet No. 2.
16.
REMOVE THE AIR CLEANER INLET NO. 1
(a)
Remove the bolt for the resonator assembly.
NOTE:
Do not remove the resonator assembly.
(b)
Remove the 1 bolt and the air cleaner inlet No. 1.