RX 330 AWD V6-3.3L (3MZ-FE) (2004)
17.
SEPARATE THE HOOD LOCK ASSEMBLY
(a)
Remove the 2 screws, disengage the 2 claws and remove the hood lock control cable cover.
NOTE:
If the cover is damaged, replace the cover.
(b)
Using a screw driver, remove the cap.
(c)
Remove the 2 bolts and nut, then separate the hood lock assembly.
18.
REMOVE THE RADIATOR SUB-ASSEMBLY UPPER
(a)
Disconnect the 2 horn connectors.
(b)
Remove the 5 bolts and the radiator support sub-assembly upper.
(c)
Disconnect the one clip and the air temperature sensor connector.
(d)
Remove the 1 lower bolt for the vertical support.