RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1407011.png)
Compressor Oil: ND-01L8 or equivalent
C.
Install the 0-ring to cooler refrigerant suction hose No.1.
D.
Install cooler refrigerant suction hose No.1 to the compressor and magnetic clutch with the bolt.
Torque: 9.8 N.m (100 kgf.cm, 87 in.lbf)
17.
Install cooler refrigerant discharge hose No.1.
A.
Sufficiently apply compressor oil to the NEW 0-ring and fitting surface of the compressor and magnetic clutch.
Compressor Oil: ND-01L8 or equivalent
B.
Install cooler refrigerant discharge hose No. 1 to the compressor and magnetic clutch. Hand start the nut.
Torque: 9.8 N.m (100 kgf.cm, 87 in.lbf)
18.
Temporarily Install V belt No.1 (from the cooler compressor to crankshaft pulley).
