RX 330 AWD V6-3.3L (3MZ-FE) (2004)
19.
Adjust V belt No.1 (from the cooler compressor to crankshaft pulley).
Apply drive belt tension by turning bolt B.
Drive Belt Tension:
New Belt: 170 +/- 10 lbf Used Belt: 125 +/- 10 lbf
HINT:
^
"New belt" refers to a belt that has been used on a running engine at idling for 5 minutes or less.
^
"Used belt" refers to a belt that has been used on a running engine at idling for 5 minutes or more.
NOTE:
Check that the drive belt fits properly in the ribbed grooves.