RX 330 AWD V6-3.3L (3MZ-FE) (2004)
d. Remove the fuel suction tube w/pump & gage.
NOTE: Be careful not to bend the arm of the fuel sender gage.
e. Remove the gasket from the fuel tank.
12. REMOVE FUEL SENDER GAGE ASSY
a. Disconnect the fuel sender gage connector.
b. Unlock the fuel sender gage and slide it to remove.
13. REMOVE FUEL SUCTION PLATE SUB-ASSY
a. Using a screwdriver with the tip wrapped in tape, disconnect the 4 snap-claws from the claw holes and remove the fuel suction plate.
NOTE: Do not damage the fuel suction plate and the fuel suction support No.1.
14. REMOVE FUEL PUMP
a. Disconnect the fuel pump connector.
b. Using a small screwdriver with the tip wrapped in tape, disconnect the 2 snap-claws from the claw holes and pull out the fuel pump.
NOTE: Do not damage the fuel pump and the fuel suction plate.
c. Remove the O-ring and the fuel pump spacer from the fuel pump.