RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-859004.png)
15. REMOVE FUEL PUMP FILTER
a. Using a small screwdriver, pry out the clip.
b. Remove the fuel filter from the fuel pump.
16. REMOVE FUEL TUBE JOINT NO.1
a. Disconnect the connector.
b. Using a screwdriver with the tip wrapped in tape, disconnect the snap-claw from the claw hole and pull out the fuel tube joint No.1.
NOTE: Do not damage the fuel tube joint No.1 and the fuel suction plate.
17. REMOVE FUEL PUMP HARNESS
a. Remove the fuel pump harness from the fuel tube joint No.1.
18. REMOVE FUEL PRESSURE REGULATOR ASSY
a. Remove the clip.
b. Pull out the fuel pressure regulator from the fuel tube joint No.1.
c. Remove the 2 O-rings from the fuel tube joint No.1.
