RX 330 AWD V6-3.3L (3MZ-FE) (2004)
9.8 Nm (100 kgf.cm, 7 ft.lbf) for nut
9. INSTALL AIR CLEANER INLET NO.1
Torque: 7.0 Nm (71 kgf.cm, 62 in.lbf)
10. INSTALL AIR CLEANER BRACKET
a. Install the air cleaner bracket with the 2 bolts.Using several steps, tighten the bolts uniformly in the sequence shown in the illustration.
Torque: 12 Nm (122 kgf.cm, 9 ft.lbf)
11. INSTALL AIR CLEANER ASSY
a. Install the air cleaner case to the air cleaner inlet No.1 as shown in the illustration.
b. Using several steps, tighten the 3 bolts uniformly in the sequence shown in the illustration.
Torque: 5.0 Nm (51 kgf.cm, 44 in.lbf)
c. Connect the vacuum hose.
d. Install the 2 wire harness clamps.
e. Install the air cleaner filter element.
f.
Connect the air cleaner hose No.1 and tighten the air cleaner hose clamp bolt.
g. Tighten the 2 air cleaner cap bolts
Torque: 5.0 Nm (51 kgf.cm, 44 in.lbf)
h. Connect the 4 vacuum hoses.
i.
Connect the mass air flow meter connector.
12. INSTALL AIR CLEANER INLET NO.2