RX 330 AWD V6-3.3L (3MZ-FE) (2004)
5. REMOVE AIR CLEANER BRACKET
a. Remove the 2 bolts, and then remove the air cleaner bracket.
6. REMOVE AIR CLEANER INLET NO.1
a. Remove the bolt, and then remove the air cleaner inlet No.1.
7. REMOVE STARTER ASSY
a. Disconnect the starter connector.
b. Open the terminal cap, remove the nut and disconnect the starter wire.
c. Remove the 2 bolts, and then remove the starter.
8. INSTALL STARTER ASSY
Torque:
37 Nm (380 kgf.cm, 26 ft.lbf) for bolt