RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Accumulator: Service and Repair
PNEUMATIC W/TUBE TANK ASSY
REPLACEMENT
NOTICE: Before replacement, press the height control OFF switch to stop the vehicle height control operation.
1. REMOVE PNEUMATIC W/TUBE TANK ASSY
a. Jack or lift the vehicle up.
b. Remove the 4 clamps.
c. Disconnect the height control tube No. 1 and the wire harness from the pneumatic w/ tube tank assy.
d. Remove the 3 clips and height control tank cover.
e. Disconnect the connector.
f.
Using SST, disconnect the tube from the pneumatic w/tube tank assy.
SST 09730-00010
HINT: For the removal procedure of the (type 2) tube, refer to Service Precautions; Vehicle Damage Warnings.
g. Remove the 3 bolts and the pneumatic w/ tube tank assy.
2. INSTALL PNEUMATIC W/TUBE TANK ASSY