RX 330 AWD V6-3.3L (3MZ-FE) (2004)
a. Install the 3 height control compressor bush No.2 onto the rear height control compressor bracket.
b. Install the rear height control compressor bracket with the 3 bolts onto the height control compressor assy.
Torque: 5.9 Nm (60 kgf-cm, 52 inch lbs.)
c. Install the 3 clamps.
11. INSTALL HEIGHT CONTROL FILTER
a. Install the 2 hoses and 2 clips to the height control filter.
b. Install a clamp onto the height control filter.
c. Connect the height control filter onto the rear height control compressor bracket.
12. INSTALL REAR HEIGHT CONTROL COMPRESSOR BRACKET
a. Passing the wire harness sub-assy between the bracket and compressor, temporarily place the bracket as shown in the illustration.
b. Install the rear height control compressor bracket with the 3 bolts onto the height control compressor bracket.
Torque: 19 Nm (194 kgf-cm, 14 ft. lbs.)