RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1357006.png)
c. Connect the hose to the cap grommet and clamp it.
d. Install the 3 clamps and the 2 connectors.
13. CONNECT HEIGHT CONTROL TUBE NO.2
a. Install a new O-ring onto the height control tube No.2.
b. Coat the O-ring with MP grease.
c. Connect the height control tube No.2 to the 2 way cap.
d. Lock the tube with a new clip and a new holder.
HINT: For the installation procedure of the (type 3) tube, refer to Service Precautions; Vehicle Damage Warnings
14. INSPECT AIR LEAK
15. INSTALL HEIGHT CONTROL COMPRESSOR COVER
a. Install the height control compressor cover with the 2 screws, the clip and the bolt.
