RX 350 FWD V6-3.5L (2GR-FE) (2010)
09830-01060
NOTICE:
If the rear suspension member sub-assembly is scratched, apply paint to the scratched areas of the rear suspension member
sub-assembly.
(d) Remove SST from the rear suspension member sub-assembly.
6. INSTALL REAR UPPER CONTROL ARM ASSEMBLY LH See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Rear
Upper Arm/Installation
7. INSTALL REAR UPPER CONTROL ARM ASSEMBLY RH See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Rear
Upper Arm/Installation
8. INSTALL REAR SPEED SENSOR WIRE LH
(a) Install the rear speed sensor wire LH with the 2 bolts and nut as shown in the illustration.
Bolt - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
Nut - Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
NOTICE:
Do not twist the rear speed sensor wire when connecting it.
9. INSTALL REAR SPEED SENSOR WIRE RH
(a) Install the rear speed sensor wire RH with the 2 bolts and nut as shown in the illustration.
Bolt - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
Nut - Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
NOTICE:
Do not twist the rear speed sensor wire when connecting it.
10. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (w/ HID Headlight System)
(a) Install the rear height control sensor sub-assembly RH to the rear suspension member sub-assembly with the bolt (A) and 2 nuts.
Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
NOTICE:
Do not twist the rear height control sensor wire when connecting it.
(b) Install the rear height control sensor sub-assembly RH to the rear upper control arm assembly RH with the bolt (B).