RX 350 FWD V6-3.5L (2GR-FE) (2010)
5. INSTALL REAR SUSPENSION MEMBER REAR BODY MOUNT CUSHION RH
(a) Temporarily install the rear suspension member rear body mounting cushion RH while confirming the installation direction.
Standard (A):
10° to 20°
(b) Install SST as shown in the illustration.
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
Apply a small amount of grease to the threads and tip of SST (center bolt) before use.
HINT
Use SST with the "F" mark facing the rear suspension member rear body mounting cushion.
(c) Using SST, install the rear suspension member rear body mounting cushion RH until there is no clearance between the rear suspension member
sub-assembly and the rear suspension member rear body mounting cushion RH.
Text in Illustration
SST : 09830-10010
09830-01010
09830-01020
09830-01030