RX 350 FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
*
Set the snap ring with the opening facing downward.
*
Be careful not to damage the oil seal, boot or dust cover.
*
Install the rear drive shaft assembly while keeping it level.
2. ADD DIFFERENTIAL OIL See: Differential Assembly/Seals and Gaskets/Service and Repair/Rear Differential Side Gear Shaft Oil
Seal/Replacement
3. INSPECT DIFFERENTIAL OIL See: Differential Assembly/Fluid - Differential/Service and Repair
4. INSTALL DIFFERENTIAL INSPECTION PLUG See: Differential Assembly/Fluid - Differential/Service and Repair
5. INSPECT FOR DIFFERENTIAL OIL LEAK
6. INSTALL REAR AXLE CARRIER SUB-ASSEMBLY
HINT
Refer to the instructions for Installation of the rear axle carrier sub-assembly See: Steering and Suspension/Suspension/Rear
Knuckle/Service and Repair/Installation.