RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Text in Illustration
(b) Remove the hole plug and nut.
(c) Disengage the 10 clips and guide, and remove the front door outside moulding sub-assembly.
Text in Illustration
(d) Remove the 10 clips (quarter vent louver retainer) and bolt from the front door outside moulding sub-assembly.
(e) Remove the gasket.
4. REMOVE REAR DOOR LOWER OUTSIDE MOULDING
(a) Put protective tape around the rear door lower outside moulding.
Text in Illustration
(b) Disengage the clip and disconnect the No. 2 access panel weatherstrip.
(c) Disengage the 5 claws and 4 clips to remove the rear door lower outside moulding.