RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Lower Side Moulding / Trim: Service and Repair
Removal
EXTERIOR PANELS / TRIM: SIDE MOULDING: REMOVAL
1. REMOVE FRONT DOOR LOWER OUTSIDE MOULDING
(a) Put protective tape around the front door lower outside moulding.
Text in Illustration
(b) Disengage the 5 claws and 5 clips to remove the front door lower outside moulding.
(c) Remove the 5 clips (quarter vent louver retainer) from the front door lower outside moulding.
2. REMOVE FRONT DOOR NO. 3 WEATHERSTRIP
(a) Disengage the 9 clips and remove the front door No. 3 weatherstrip.
3. REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY
HINT
When removing the front door outside moulding sub-assembly, heat the vehicle body and front door outside moulding sub-assembly
using a heat light.
Heating Temperature
NOTICE:
Do not heat the vehicle body or mouldings excessively.
(a) Put protective tape around the front door outside moulding sub-assembly.