SC 300 L6-3.0L (2JZ-GE) (1992)
Fig. 17 Aligning Camshafts For Installation
Fig. 18 Applying Seal Packing To Front Camshaft Bearing Caps
Fig. 19 Camshaft Bearing Cap Bolt Torque Sequence
17.
Reverse procedure to install, noting the following:
a. Follow cylinder head tightening sequence, Fig. 16.
b. Refer to SPECIFICATIONS/MECHANICAL SPECIFICATIONS/TIGHTENING SPECIFICATIONS for torque values.
c. When installing camshafts, line up knock pins as shown in, Fig. 17.
d. Apply seal packing to both front bearing caps, Fig. 18.
e. Torque camshaft bearing cap bolts to 14 ft. lbs. in sequence shown in Fig. 19.
f.
Install new camshaft seals using seal installer 09316-60010 or equivalent.