SC 300 L6-3.0L (2JZ-GE) (1992)
12.
Remove intake manifold and No. 1, No. 2 and No. 3 cylinder head covers and gaskets.
Fig. 13 Removing Camshaft Timing Pulleys
Fig. 14 Camshaft Bearing Cap Bolt Loosening Sequence
Fig. 15 Cylinder Head Bolt Loosening Sequence
13.
Hold hexagon portion of camshaft with a wrench and remove pulley mount bolt and camshaft pulley, Fig. 13.
14.
Remove No. 4 timing belt cover, then remove both front camshaft bearing caps and seals.
15.
Uniformly loosen and remove bearing cap bolts in several passes in order shown in Fig. 14, then remove bearing caps and both camshafts.
16.
Using a 10 mm bi-hexagon wrench, uniformly loosen and remove head bolts in several passes in order shown in Fig. 15, then remove cylinder
head.
Fig. 16 Cylinder Head Bolt Torque Sequence