lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 37 > < Initial Inspection and Diagnostic Overview|Page 35
Page 5
background image

-

Disconnect Fuse Cavity No.24 (5A).

-

Perform Multiplex Communication Network Diagnostic Test via New Generation Star Tester.

Test value for Circuit 915(-) = 01FF or 03FF?

Yes

Driver's Door Module, Vehicle Dynamics Module and Cellular Phone Module OK. GO to B3

No

Short Circuit in 915(-) between Fuse Cavity No.24 and one of the following modules: Driver Door Module, Vehicle Dynamics Module,
Cellular Phone Module (Optional). Reconnect Fuse in Cavity No.24. GO to B12.

B3 Check Short In Circuit 915(-) Between DLC And Virtual Image Cluster Module

-

Disconnect harness connector C4 (8-way) between harnesses 14A488 and 14B242.

-

Perform Multiplex Communication Network Diagnostic Test via New Generation Star Tester.

Test value for Circuit 915(-) = 01FF or 03FF?

Yes

Short Circuit in 915(-) between DLC Pin No.10 and Virtual Image Cluster connector. Reconnect harness connector C4 (8-way). GO to
B17

No

Virtual Image Cluster Module OK. Reconnect harness connector C4 (8-way). GO to B4

B4 Check Short In Circuit 915(-) Between Connector C2 (40-way, Black) And PCM

-

Disconnect harness connector C2 (40-way, Black), between harnesses 14A488 and 14398.

-

Perform Multiplex Communication Network Diagnostic Test via New Generation Star Tester.

Test value for Circuit 915(-) = 01FF or 03FF?

Yes

PCM OK; Reconnect harness connector C2; GO to B5

No

Short Circuit in 915(-) between harness connector C2 (40-Way, Black) and PCM: Reconnect harness connector C2; GO to B18.

B5 Check Short In Circuit 915(-) Between Connector C3 (40-way, Brown) And Anti-lock Brake System Module

-

Disconnect harness connector C3 (40-way, brown), between harnesses 14A488 and 14290.

-

Perform Multiplex Communication Network Diagnostic Test via New Generation Star Tester.

Test value for Circuit 915(-) = 01FF or 03FF?

Yes

Anti-lock Brake System Module OK; Reconnect harness connector C3 (40-Way, brown); GO to B6

No

Short Circuit in 915(-); between harness connector C3 (40-way, brown) and Anti-lock Brake System Module: Reconnect harness connector
C3; GO to B20

B6 Check Short In Circuit 915(-) Between Connector C5 (84-way) And Lighting Control Module

-

Disconnect harness connector C5 (84-Way), between harnesses 14A488 and 14401.

-

Perform Multiplex Communication Network Diagnostic Test via New Generation Star Tester.

Test value for Circuit 915(-) = 01FF or 03FF?

Yes

Lighting Control Module OK. Reconnect harness connector C5 (84-Way); Replace Circuit 915(-) between harness connector C4 (8-way),
Harness Connector C5 (8-way), harness connector C2, harness connector C3 and Terminal Fuse Cavity No.18.

No

Short Circuit in 915(-) between harness connector C5 (84-Way) and Lighting Control Module. Reconnect harness connector C5 and GO to
B21 

B7 Check Short Circuit 915(-) In Driver Seat Module

-

Disconnect Driver Seat Module from harness 14A488.

-

Perform Multiplex Communication Network Diagnostic Test via New Generation Star Tester.

Test value for Circuit 915(-) = 01FF or 03FF?

Yes

Reconnect Driver Seat Module, GO to B8

No

Short in Driver Seat Module. Replace Driver Seat Module and Retest the Multiplex Communication Network. Service as necessary.

B8 Check Short Circuit 915(-) In Front Control Unit Module

-

Disconnect Front Control Unit from harness 14B242.

Initial Inspection and Diagnostic Overview|Page 37 > < Initial Inspection and Diagnostic Overview|Page 35