lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Alignment|Front|Page 936 > < Alignment|Front
Page 2
background image

PROCEDURE 

1. Loosen the front suspension lower arm strut front nut at the front sub-frame.

2. Adjust the front suspension lower arm strut nut behind the sub-frame toward the front of the vehicle to decrease caster and toward the rear of the

vehicle to increase caster.

3. Tighten the front nut while holding the rear nut.

Toe

DESCRIPTION

-

Toe should only be checked and adjusted after, the caster and camber have been adjusted to specification.

-

Toe-in and toe-out is the difference in the distance between the extreme front and extreme rear of the tires. Toe-in occurs when the dimension
taken at the front of the tires is less than that taken at the rear of the tires-positive toe. Toe-out occurs when the dimension taken at the front of the
tires is greater than that taken at the rear of the tires-negative toe.

PROCEDURE 

1. Start the engine and move the steering wheel back and forth several times. Center the steering wheel and lock into place.

Alignment|Front|Page 936 > < Alignment|Front