MKT AWD V6-3.5L Turbo (2010)
57. NOTE: Align the index marks for the turbocharger intake pipe.
Install the RH turbocharger intake pipe to the RH turbocharger and tighten the clamp.
-
Tighten to 5 Nm (44 lb-in).
58. NOTE: Align the index marks for the RH CAC tube.
Install the RH CAC tube to the RH turbocharger and tighten the clamp.
-
Tighten to 5 Nm (44 lb-in).
59. Connect the RH turbocharger bypass valve electrical connector.
60. NOTE: Lubricate the oil pan bore with clean engine oil.
Using 2 new O-ring seals, install the LH turbocharger oil return tube in the oil pan.
61. Install a new gasket, turbocharger oil return tube and the 2 bolts.
-
Tighten to 10 Nm (89 lb-in).
