MKT AWD V6-3.5L Turbo (2010)
62. NOTE: Align the index marks for the turbocharger intake tube.
Install the turbocharger intake tube to the LH turbocharger and tighten the clamp.
-
Tighten to 5 Nm (44 lb-in).
63. Install the 2 turbocharger wastegate regulating valve hoses to the turbocharger wastegate regulating valve and to the RH CAC tube.
64. Connect the LH turbocharger bypass valve electrical connector.
65. If equipped, connect the 2 heated PCV electrical connectors.
66. Install the PCV tube and connect the 2 quick connect couplings. For additional information, refer to Fuel Delivery and Air Induction.